Many older Intel Ethernet Adapters have base drivers supplied by Microsoft Windows. They support 32-bit versions of Linux* and FreeBSD*.ģ Basic software and drivers are supported on the following operating systems: DOS SunSoft* Solaris* (drivers and support are provided by the operating system vendor) Advanced software and drivers are supported on the following operating systems: Microsoft* Windows* 7 Microsoft Windows 8 Microsoft Windows 8.1 Linux*, v2.4 kernel or higher FreeBSD* Supported Intel 64 Architecture Operating Systems Microsoft Windows 7 Microsoft Windows 8 Microsoft Windows 8.1 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Red Hat Linux SUSE Linux FreeBSD Supported Operating Systems for Itanium-based Systems Linux, v2.x kernel and higher, except v2.6 Some older Intel(R) Ethernet Adapters do not have full software support for the most recent versions of Microsoft Windows*. ![]() Supported 32-bit Operating Systems NOTE: Intel 10GbE Ethernet Adapters do not support Microsoft* Windows* 32-bit operating systems. Please check your system manual to identify the slot. Some systems have physical x8 PCI Express slots that actually support lower speeds. The Intel 10 Gigabit AT Server Adapter will only fit into x8 or larger PCI Express slots. It cannot be installed in a 5.0 volt or universal slot. NOTES: The PRO/1000 MT Quad Port Server adapter requires a 3.3 volt only slot. Hardware Compatibility The latest BIOS for your computer One of the following slot types, depending on your adapter: One open PCI bus master slot, 32-bit or 64-bit, operating at 33 or 66 MHz One open PCI-X slot operating at 66, 100 or 133 MHz(recommended) One open PCI-Express slot (v1.0a or newer), 4x, 8x, or 16x. System Requirements Before installing the network adapter, check your system for the following minimum configuration requirements. ![]() The available features and the configuration process varies with the adapter and your operating system. You can now set up advanced features, if necessary. If you have any problems with basic installation, see Troubleshooting. For Windows systems, install the Intel PROSet software. Attach the copper or fiber network cable(s). If you are upgrading the driver software, start with step Make sure that you are installing the latest driver software for your adapter. Installing the Network Adapter If you are installing a network adapter, follow this procedure. ![]() This guide covers hardware and software installation, setup procedures, and troubleshooting tips for Intel network adapters, connections, and other devices. 1 Intel Ethernet Adapters and Devices User GuideĢ Overview Welcome to the User's Guide for Intel Ethernet Adapters and devices.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |